Accuracy / distance between points can be specified in the option menu.Number of teeth to be generated for cylindrical gears, bevel gears and involute spline profiles can be defined in the option menu.Bidirectional connection between eAssistant and Solid Edge (shaft, gear, involute spline profile as single part).

The calculation information is saved in the 3D model and is available at any time.With just one click, the design table with all manufacturing details of involute splines can be placed on the drawing as well. Involute splines can be created as a 3D Solid Edge part (single part or directly on existing part) on the basis of the calculated data.For serrated and splined shaft connections, the shaft and the hub profile can be generated as native 3D models (single part) based on the calculation.Solid and hollow shafts with an unlimited number of cylindrical and conical shaft segments can be generated.The appearance and size of that table is individually configurable. A simple mouse-click allows to add all necessary manufacturing data of a gear wheel to the drawing.Based on the calculation, straight, helical and spiral bevel gears can be automatically created as a native 3D part in Solid Edge.For this purpose, the user has to specify an offset (increase of the facewidth) or a radius for the cutter or grinding wheel.

During the generation, a tool runout can be developed.

Cylindrical gears can be created as a single part or directly on an existing part.

Based on the calculation, external and internal, spur and helical gears can be generated automatically as a feature-based 3D part in Solid Edge.It is possible to start all eAssistant calculation modules directly from Solid Edge through an integrated menu.I looked up ansi spec and for # 25 it had a pitch of 0.25 in, which should mean the diametrical pitch is 4? (1/0.25) and for #35 (0.375 in pitch) a diametrical pitch of 2.66666…?įor # 25 it says the roller diameter max is 0.13 - so should the root fillet radius be 0.13/2 =0.65?įor #35 it says the roller diameter max is 0.2 - so should the root fillet radius be 0.2/2=0.1?Įdit 2: This add in is for gears not sprockets - I do not know how to read lol. root fillet radius (which seems to be the inner radius in between teeth)ĭoes anyone have any guidance on what parameters I need to use?.diametrical pitch (number of teeth per inch of pitch diameter).Pressure Angle (14.5, 20, 25 or custom).I found an add in for F360 that should work (looks like a similar generator to the others people have shown in this thread) but I am not sure what parameters to put in. I looked into downloading other programs but decided I did not want to go down that rabbit hole.

Gear teeth generator dxf